Stereo Signal Headphone Splitter – 3.5mm Stereo to Dual XLR Splits a 1/8” TRS stereo (left, right) signal into two individual XLR channels. Ideal for splitting an existing 3.5mm mini-jack headphone cable, into two channels on a mixing desk. By panning each channel Left or Right on ...Stereo Signal Headphone Splitter – 3.5mm Stereo to Dual XLR Splits a 1/8” TRS stereo (left, right) signal into two individual XLR channels.
Ideal for splitting an existing 3.5mm mini-jack headphone cable, into two channels on a mixing desk. By panning each channel Left or Right on a mixer, you can replicate the “true stereo” sound from the headphone output. Need Extra Length? Extend with a TRS 3.5mm 1/8” AUX Cable to give the desired length.
Note. A headphone signal is a “loaded” signal, designed to push the tiny speaker cone inside headphones. If connecting into a low-Z XLR mic input with a preamp (i.e.
not a line level input), note that the signal may be “hot” and little or no gain may be required, even using a pad may be necessary. Setting your smartphone or laptop volume below 85% is a good way to minimise any possible input overload and signal distortion. Quality Cable and Connectors Our slim 4.4mm diameter cable maintains thick 23AWG conductors and a tight spiral shield, but utilises a thinner outer PVC jacket allowing for a smaller overall diameter.
Ideal for patching devices in tight spaces and to minimise cable clutter. Using professional quality connectors, OFC conductors and a tight and thorough spiral shield, this cable is designed to transfer your signal without interference while being flexible and able to withstand the rigours of constant use. Specifications: Cable Colour: Black Cable Core: 0.12mm*20*2(Conductors) + 0.12mm*48(Spiral Wrapped Shield) Conductor Gauge: 23 AWG / 0.23mm2 Outer Diameter: 4.4mm Connectors: 1/8” TRS (female) to 2x XLR (male) – (SWAMP TP180, Yongsheng YS137N-B) Wiring: 1/8” female (Stereo / TRS) XLR (red) XLR (black) Tip Pin 2 Ring Pin 2 Pin 3 Pin 3 + Pin1 Pin 3 + Pin1 Length: 30cm