Flat Head Furniture Bolts are commonly used in the furniture industry especially flat pack furniture signage and cabinet joinery. An aesthetically pleasing fastener due to the very low profile and wide head shiny nickel coated finish and hex socket drive making it easy to install ...Flat Head Furniture Bolts are commonly used in the furniture industry especially flat pack furniture signage and cabinet joinery. An aesthetically pleasing fastener due to the very low profile and wide head shiny nickel coated finish and hex socket drive making it easy to install with a standard allen key or hex bit and a drill driver.
A range of corresponding furniture nuts that if a through-hole needs to be used it looks identical from both sides or a slotted barrel dowel nut are available. Also known as a JCB bolt or joint connector bolt Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments.
Most products can be identified by the following markings: A2 A2-70 304 or G304. Stainless steels are largely non-magnetic but it is common for stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw bolt or fastener expressed in millimetres (mm). Used when referring to Metric parts.
For example a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.